Skip to main content

Synergy RF — Density + Synerjet Integrated Signature

Density Alpha-Tip + Synerjet liquid PCL

Synergy RF combines Density with Synerjet liquid PCL for skin that is starting to lose dermal density. It is repeated once every 6–12 months, and redness and warmth settle within a few hours.

ABLE Dermatology (에이블피부과) · 140 Jungdae-ro, Songpa-gu, Seoul, 4-5F · right in front of Police Hospital Station (Line 3) Exit 4 — turn left from the exit · from Jamsil: Line 8 to Garak Market, then Line 3 for one stop

Medically reviewed by Dr. Jeong Kyungmuk, board-certified dermatologist · Last updated

Density RF + Synerjet PCL — Tightening and Collagen Boosting in One Session

ABLE Synergy RF is the Signature RF package at ABLE Dermatology in Songpa. Density Alpha-Tip (combined monopolar and bipolar RF) delivers radiofrequency energy to the dermis and the fibrous septa beneath it for immediate tightening, and then Synerjet injects liquid PCL (GOURI) evenly through the dermis. It is not a simple bundle: the timing between the energy treatment and the injectable is planned carefully.

Because RF tightening and liquid PCL collagen boosting are done in one session, they can work together on elasticity, dermal density and wrinkles. The effect develops gradually over 1-3 months.

Density Alpha-Tip mono+bipolar RF device, ABLE Dermatology
Density Alpha-Tip — monopolar and bipolar RF

The Limits of Density Alone

Density is a tightening treatment that combines monopolar and bipolar RF. On its own, however, (1) it does not add material to reinforce the dermis, (2) its effect on deep fine lines and texture is limited and (3) beyond the immediate short-term effect, the dermis needs extra support to maintain the result.

What Synerjet Adds to the Dermis

Synerjet is a needle-free injection device that spreads liquid PCL (GOURI) evenly through the dermis.

When is Synergy RF used?

It is recommended for people around their 40s who have both loss of elasticity and declining dermal density, and who want to address texture, elasticity and dermal support in one treatment.

  • Loosening of the dermis and the fibrous septa beneath it together — a multi-layer approach where a single treatment falls short
  • Better texture and pores — RF tightening plus new dermal collagen
  • Gradual improvement of wrinkles and fine lines — liquid PCL builds collagen step by step
  • Less downtime — even, needle-free injection with a usually quick return to daily life

Declining Dermal Density Around Your 40s

At this stage, collagen production can no longer keep up with collagen breakdown, and the dermis starts to thin. RF stimulation alone has difficulty reinforcing the collagen environment, so adding Synerjet, which spreads PCL evenly in the dermis, is meaningful.

When Texture and Pores Are Also Changing

As the skin thins and dermal collagen decreases, texture becomes rougher and pores look larger. Tightening the surface and deeper layers with RF while supporting the dermis with PCL lets texture, pores and elasticity improve together.

For Gradual Improvement of Wrinkles and Fine Lines

A single RF session does little for deep wrinkles that are already set. PCL builds collagen gradually over 1-3 months, so fine lines may soften.

How Your Synergy RF Is Planned at ABLE Dermatology

It is not simply two devices put together: the order of RF warming → PCL injection → soothing is planned carefully. Dr. Jeong sets the output, injection pattern and intervals himself.

Assessment

We assess skin thickness, dermal density and the pattern of lost elasticity. We check whether you use an electronic medical device such as a pacemaker or implanted defibrillator and whether you have metal implants, and discuss your skin sensitivity and how much recovery time you can allow.

Treatment

Monopolar RF delivers broad heat to the deep dermis and the fibrous septa beneath it, and bipolar RF warms the upper dermis precisely. Synerjet then injects PCL evenly through the dermis. The RF output and PCL injection depth are fine-tuned to how you feel.

Aftercare

Right after the injection, light soothing care calms redness and settles the skin barrier. We give you home-care guidance for the first 24 hours, the first week and the first month, and arrange extra soothing care if needed.

How is Synergy RF treatment performed?

Step 1: Density Alpha-Tip RF (20-25 Minutes)

Monopolar RF delivers broad heat down to the deep dermis and the fibrous septa beneath it, while bipolar RF warms the upper dermis precisely, encouraging both immediate collagen contraction and longer-term collagen renewal. The output is adjusted step by step to your skin's sensitivity.

Step 2: Synerjet Liquid PCL Injection (10-15 Minutes)

Synerjet injects liquid PCL (GOURI) evenly and without needles into the RF-warmed dermis. This creates an environment for collagen boosting while aiming for a smooth, natural result, and collagen builds up gradually over 1-3 months.

Step 3: Soothing Finish

The treatment ends with soothing care to calm redness and mild warmth after the injection. Settling the skin barrier makes it easier to return to your routine from the next day.

Synergy RF at a Glance

Who It Suits

  • Dermal density starting to decline, around your 40s
  • RF alone was not enough for texture and dermal support
  • You want to address elasticity, the dermis and texture in one treatment
  • You want a multi-layer approach without much recovery time

Before Treatment

  • Treatment time: about 30-40 minutes
  • Tell us in advance about a pacemaker or metal implants
  • Not suitable during pregnancy or breastfeeding
  • Avoid alcohol and sun exposure before and after treatment

Recovery

  • Redness and warmth settle within a few hours
  • Mild bruising or a lumpy feeling at injection sites: 5-7 days
  • Cleansing and makeup: from 3-4 hours after
  • Results: over 1-3 months, usually lasting about a year (varies by person)

How do the ABLE Signature packages compare?

TreatmentSuited toSessions / intervalRecovery
Synergy RFSkin starting to lose dermal densityOnce every 6–12 monthsWarmth a few hours
Wave UltherapyDermis and SMAS sagging togetherEvery 6–12 monthsDull, heavy pain 1–3 days
Double Chin PackageFat and sagging under the chinDecided at consultationSwelling and redness 3–7 days
ABLE Layered BoosterFirmness and pores / redness and sensitivityCourse, 4–6 weeks apartExplained at consultation
Pigment AIOMelasma, spots and pigmentation together11 sessions, 1–2 weeks apart (extended as needed)Toning: none
Redness AIOPersistent redness, rosacea tendency5 sessions (AIO+ 8), 3–4 weeks apartMild bruising 5–7 days

Sessions, intervals and recovery vary with your skin and are decided at your consultation.

Synergy RF: before and after

Talk to us first if…

  • If you use an electronic medical device such as a pacemaker or implanted defibrillator, tell us in advance (RF may not be possible).
  • Tell us in advance if you have metal implants in the treatment area.
  • Not suitable during pregnancy or breastfeeding.
  • Tell us in advance if you have diabetes or altered skin sensation.

Precautions

  • No strong massage on the injection sites for 24 hours after treatment.
  • Avoid saunas, hot baths and strenuous exercise for 1 week after treatment.
  • Avoid alcohol and smoking for 1 week after treatment.

Synergy RF FAQ

How is it different from Density alone?

Density alone provides RF tightening. Synergy RF adds an even injection of liquid PCL after the RF to support the collagen environment in the dermis, so improvements in dermal density and texture can be expected alongside tightening.

How often should I have it?

Once every 6–12 months is recommended. The effect develops gradually over 1-3 months after treatment and usually lasts about a year, though this varies from person to person.

Do I need massage afterwards?

Liquid PCL does not need massage. However, do not press or rub the injection sites firmly for 24 hours.

How long does the whole treatment take?

About 30-40 minutes including preparation and finishing: Density RF for 20-25 minutes, Synerjet PCL for 10-15 minutes, then the soothing finish.

Can it be combined with other treatments?

Yes. It can be combined with toning, boosters and other treatments as part of an overall plan, and the intervals are arranged with you at your consultation.

Can I go back to my daily routine right after treatment?

Redness and warmth settle within a few hours, so you can return to your usual routine from the next day. Mild bruising at the injection sites fades on its own in about 5-7 days.

Be able to choose, not be pushed.

Step-by-Step, Tailored Care with ABLE Signature

Dr. Jeong Kyungmuk examines your skin and plans a Signature combination that suits it.

This content is general medical information. Treatment effects and side effects vary from person to person. For diagnosis and treatment, please visit us for a consultation.

EventsAnnouncements
BookQuick reservation
WhatsAppBusiness Chat
Instagram@ableclinic_official
X@mukderma
DirectionsSongpa, Seoul